Fundamental errors of printer cartridges (sort with phrases)

cac loi hop muc may in

Synthesize the best way to diagnose the essential errors of printer ink cartridges, collected from many alternative consultants.


1. Dots On Printed Paper

– Four dots line up from the highest down, when printing white paper, it additionally will get: drum

– Four dots in a line from high to backside, when printing a white sheet of paper, typically it would not: the silk bag has a gap in it

– Eight dots in line: su. The best way to use hygiene, if not, exchange the tree. can get magnets too however much less frequent

– 9 straight dots: magnet.

2. Lengthy streaks on printing paper

– Black streak from high to backside is about 2cm huge: normally it’s small, proper on the place the place it’s blacked, it’s smooth, or the magnet is moist.

– Small straight black streak operating from high to backside (1 inch greater than hair): The massive wiper is soiled (proper on the soiled spot on the massive wiper with a little bit of ink on it.

– Black streaks are about 7-Eight streaks away: su, possibly the magnets are damp (uncommon) primarily as a result of when refilling ink, they contact the su with soiled arms.

– Black streak on the high of the paper: paper separation 3

3. Output paper is blurred

– If the 12A toner cartridge dims half a sheet: examine if the loxo is involved with the drum holder or not?

– Blurring alongside the lengthy path: take away the ink cartridge to see if the magnet has the identical streak or not? in any other case it is as a consequence of drum

– Blur promoting manner: drum. There are additionally some instances as a consequence of small wipers, magnets however much less frequent (cartridges are loaded too many instances with out altering one other new field, solely new cartridges are loaded 2-Three instances, virtually none.

4. The background of the printed paper is black

– Often as a consequence of massive wiper.

5. Flawed ink refill

One other 1 pan is because of the flawed ink loading, the ink doesn’t are available whereas the outdated ink continues to be there (if the outdated ink runs out, the entire paper will likely be black) and that is primarily as a result of another person does it for me. That particular person (or the child the place I play rather a lot) after I see this, I simply blow out the ink cartridge and refill it.

6. Cartridge-specific expertise abstract

– Prints are black with stripes -> Broken drum (Drum)

– Prints with vertical black streaks -> Blanking error. (Massive swipe)

– The printout has black streaks within the form of a rope -> Magnetic slip error (Small slip on the magnetic shaft)

– Prints have a black matte layer -> as a consequence of damp charging shaft, or as a consequence of poor drum.

– Black print on the entire web page -> Charging shaft will not be linked

– The print is bubbled like a drop of water -> Drum failure.

– Patchy black print -> unstable charging shaft.

– The print is blurred, the massive letters are clear, the small letters are a bit thorny -> the laser mild of the mirror field is poor.

– The print is blurred italic -> as a consequence of poor drums

– The printout is blurred on the entire web page -> poor ink, magnetic wiper error or dusty mirror.

– The printout is abnormally soiled (which means there isn’t any rule as talked about above) -> Most definitely as a consequence of rice leaves (a skinny piece of white plastic situated on the blanking place and the waste ink aspect of the cattric .

– The printout is pure white -> no energy on the cupboard head (the spring on the magnetic shaft you imply)

– The printout when printed is peeling -> the ink high quality will not be good.

7. Different Reference Collections for Printer Cartridges

Frequent errors when printing and the best way to deal with them

– Prints are black with stripes => broken blanks.

– The print has a vertical black streak => because of the clean brush.

– The printout has a black streak alongside the web page => as a consequence of a wording error.

– The print has black dots 5cm-7cm => as a consequence of scratched drums.

– The print is black dot 3cm -4cm => as a result of the magnetic shaft has traces.

– Prints with black dots 3cm-4cm or 5cm-7cm within the form of snail scales => as a consequence of perforated drying batch -Prints are horizontal strains on printed pages with gaps or typically outfitted => as a consequence of magnetic axis errors. extra: pour Combine outdated ink and new ink (for instance, earlier than filling in common ink with a dwarf field made in japan & then pouring in winmax ink)

– The printout has a black matte layer => as a consequence of damp charging shaft, poor drum when pouring high-fine ink with low-speed machine, or due to moist ink.

– The printout is black on the entire web page => as a result of the charging shaft will not be linked to electrical energy.

– Prints are bubbled like drops of water, typically horizontal strains on the printed web page => as a consequence of drum harm.

– The print is black and patchy => as a result of the charging shaft is unstable.

– The print is blurred with massive letters, however small letters with spikes => as a consequence of weak laser lights.

– Full web page blurred print => poor ink or weak phrase don’t take away customary ink. It’s doable that the mirror system is soiled and have to be cleaned.

– The print is blurry like a straight line from the highest => as a result of the laser mild path is obstructed.

– The print is blurred 1 streak from the highest however shaken after which printed once more => as a consequence of operating out of ink.

– The print is blurred italic => as a consequence of poor clean.

– The printout is blurred proper on the web page with a fair distance => examine if the 2 magnetic shaft cushions are torn.

– The printout is blurry at instances => see if some machines have an excellent coil spring head from the ability provide.

– The print runs to the underside of the drum, then stops => see if the drum rotates.

– The print runs to the drying lot or stops after 1 minute => see if the drying batch rotates, possibly as a consequence of a very long time, the lubricating grease layer contained in the drying batch is dry, so the drying batch can not rotate.

– The print out 1 paragraph, then cease => evaluate the paper sensor or the fusing batch.

– The print out is pure white => no energy on the magnetic shaft.

– The print out when printing the ink is peeling => because of the high quality of the ink.

– The printout could be erased by hand => see if the drying batch is rolled in by the paper, or due to the standard of the ink.

– The printer cannot pull the paper or run for a bit then cease => as a result of the paper roll is worn.

– The printer pulls numerous paper => because of the worn paper division.

– The printer when printing hisses after beginning to print => as a result of the optical motor is caught.

– The printer creaks when printing => examine the ink cartridge or the paper switch rollers are dry.

– The printer runs 1 section, then Three lights on (or error message on the display) => formater error or warmth bar.

– The printout when operating doesn’t come out and the paper is blocked => possibly the paper sensor is damaged after the paper roll.

– Printed a web page however pulled Three pages and reported a paper jam => the paper curler relay was caught.

– Every time you print, you must press the print button on the printer to print (massive machines with screens) => it could be because of the flawed dimension of the pc paper and the printer.

– When the print command is printed, the printer mild flashes for a very long time => possibly the formater card is soiled.

– If the printout is broken however the print continues to be clear, the area between the letters is equal to the clean ring as a consequence of harm to the charging shaft, or because of the charging shaft contact=> exchange the charging shaft or examine the charging shaft connection.

– If the textual content is reprinted and the print is soiled, it could be as a consequence of a poor drying batch (as a result of the drying batch has worn out its anti-stickiness for a very long time, so it should persist with the drying batch) => exchange the drying batch with a brand new one.

– The printer prints out miscellaneous textual content=> evaluate the print cable or card formater

You May Also Like

About the Author: RIFAT

Leave a Reply

Your email address will not be published. Required fields are marked *